Smartphones with Huawei HiSilicon KIRIN 710
The HiSilicon Kirin 710 is a ARM-based mid-range Octa-Core-SoC for Android based smartphones and tablets. It was announced mid 2018 and contains 8 processor cores (4x Cortex-A73 at up to 2.2 GHz, 4x Cortex-A53 at up to 1.7 GHz, BigLITTLE), an ARM Mali G51 MP4, a dual-channel LPDDR4 memory controller and a LTE radio (600 Mbps down, 150 Mbps up). Therefore, the CPU part is similar to the Kirin 960 and 970 (both higher clocked), but the graphics card is a lot slower.
The Kirin 710 is manufactured at TSMC in 12 nm (compared to the 16nm Kirin 960 and 10nm Kirin 970).
in this tutorial i teach you how to repair Huawei dead boot (hiSilicon KIRIN 710)
- Open sigma key
- Choose HISILICON platform
- Do Test Point to enter USB COM 1
- Wait for the phone to enter Fast boot Mode.
- Read the phone information and go to download a ROM corresponding to the same information
- Download Board Firmware.
- Flash Board firmware via Sigma key or IDT Tool.
- Finally flash the official firmware.
Smartphones with Huawei HiSilicon KIRIN 980
- Open sigma key
- Choose HISILICON platform
- Do Test Point to enter USB COM 1
- Wait for the phone to enter Fast boot Mode
- Read the phone information and go to download a ROM corresponding to the same information
- Download Board Firmware.
- Flash Board firmware via Sigma key or IDT Tool.
- Finally flash the official firmware.
Smartphones With Huawei MTK
- Must have a Box supporting Huawei MTK Flashing
- Download DA File (For read or Flash scatter)
- You can use SP Flash Tool With DA file
Smartphones With Huawei Qualcomm
- Flash Board It is a flash used to revive dead phones and it is a factory flash that is flashed by the fast boot mode or EDl.
- Dump Flash It is the flash that is reads from other devices in EDL mode and is flashed to devices that have lost the boot.
- Boxes that support these tasks
READ INFO HUAWEI All Model VIA CMD ( MINIMAL ADB )
- Run Minimal ADB Application
- Make phone in Fast boot Mode
- Turn Off Phone
- Press and hold volume down
- Insert usb cable (Fast Boot Mode)
- Copy and past this Command fastboot oem get-build-number
- Press Enter
- You will see Huawei phone information
Huawei OEM Files
OEM stands for “original equipment manufacturer”. In the smartphone industry, this term refers to companies who manufacture their own phones in their own factories.
Some examples of Android OEMs are Samsung, Huawei...